ELISE Stereo single end 520B/300Bxls
Since we had gone back to less power single ended output designs for all the right reasons, we now had to search for more power from our single end designs.
The answer hence was in the new valve 520 b or the equivalent 300Bxls [email protected] watts.
“Musicality” is sometimes used as an excuse for shortcomings in detail retrieval and dynamic’s, this amp has both, the ELISE excels in these and other areas.
Again like the Diavolo same topology but with solid state high current power supply incorporating 2 pye filters and a choke filter for left and right channels.
Also fitted our unique Sentry Circuit.
16 watts Triode with split bobbin multi section output transformers 4 and 8 ohm taps, 0 feedback speaker 89 db and above required for best results.
TYPE: SINGLE END 520B
POWER: 18 WATTS
FREQUENCY RESPONSE @1WATT: 10 HZ TO 20 K + – 0.5 db
FREQUENCY RESPONSE @FULL POWER: 20 HZ TO 20 K + – 1.1db
INPUT SENSITIVITY: 450 mv
INPUT IMPEADANCE: 220 KΩ
OUTPUT IMPEADANCE: 4Ω AND 8Ω
NOISE AT SPEAKER TERMINALS: TYPICALLY 1.5 mv typl.
FEEDBACK: 0 dB
BIASING: AUTOMATIC (ELECTRONIC)
CONSTRUCTION: HYBRID PCB / HARD WIRE
COMPONENTS: RESISTORS 1% METAL OXIDE , CAPACITORS LOW INDUCTANCE LOW ESR, COUPLING CAPS HOVLAND
TRANSFORMERS: MULTI SECTION SPLIT BOBBIN
RECTIFIER: SOLID STATE WITH A SERIES VALVE DELAY
DRIVERS: 6922 AND 12 BH7
HEATERS: DC REGULATED
SET UP: NO SET UP REQUIRED PLUG AND PLAY, NO MATCHING ON POWER VALVES, MATCHING REQUIRED ON DRIVERS
SENTRY CIRCUIT: THE UNIT IS FITTED WITH OUR CURRENT MONITOR CIRCUIT. THIS PROVIDES AMP PROTECTION AGAINST VALVE FAULTS, WITH A 40 SECOND HT DELAY ON SWITCH ON.
SIZE: 18 inches wide, 14 inches deep, 9 inch high
WEIGHTt: 30 kg